Sunday, September 1, 2019

A Wheel Explodes!

I just like this picture of the Organ Donor peeking out of the grave

Page Six: If you give a mouse a cookie...

If I see that I can take something completely apart, I can’t help it, I’m gonna wanna clean every piece.  Sane people would sandblast their wire wheels and paint them – done - but not me.  I have to take the damn things apart, every single spoke!   If it was put together, by the ghosts of the Rootes brothers, it’s coming apart!

Once the first wheel came out of my battery-charger-powered de-rusto cauldron, I tested a few nipples to see if I could tighten/loosen them to be able to true the wheel.  Some moved, most defiantly refused to budge.  Spokes and nipples had fused from their time on the road and at least a quarter century in the mud, so I threw the first one back in the brew for another 48 hours.  All de-rusted and laid out on the bench, the spokes, I thought, need sanding.  I’ll just take them apart clean ‘em up, how hard can it be?  It can be quite a pain, but with some of the spokes out, the scars on the center hub taunted me.  The rim’s rust pitting and dents glared at me - one thing led to another and now…

Bits, lots-o-bits…

Two wheels have exploded with shrapnel all over the floor.  We’re talking LOTS-O -BITS.  The wheels are 60 spoke, 13 inch Dunlop-cum-MWS wire wheels with 20 long and 40 short spokes, one center hub, one outer rim and 60 nipples – that’s 122 bits per wheel!  And there are five wheels (don’t forget the spare)!  By my calculations, tap, tap, tap… tap, that’s 610 bits, all told.

And you know I’m cleaning, sanding, chasing threads, straightening and “perttying up” every one of those bits.  (You’ll note the pile of spoke bones in the pic – some spokes put up quite a fight.)  Bent spokes, rounded-off nipples, the scarred center hub, the rust pitted rim – I can’t let any of it go.

Turns out, the wheels needed to come apart because spokes solidly and permanently rusted to their nipples would make truing the wheels a real can of spam.


Boom!  Spokes all over the place!
One rim just out of the Derusto-Cauldron and one primed and ready!

Spokes, lots-o-spokes…

Many of the long spokes have misshaped heads, indicating they endured considerable stress. The short spokes, on the other hand, survived their travails a little better. When I started this ordeal, I planned to salvage and rehab the spokes, replacing only the missing or broken few. Not happening. My first order to Buchanan Spokes and Rims, Inc. is for 100 spokes (60 longs, 40 shorts) and 100 nipples, which should get me into the third wheel (maybe the fourth depending on how hard each wheel plans to fight me), but there will be at least one more order.

Engineering Factoid

The short spokes keep the wheel round while the long spokes manage the wobble.  That means that the long spokes take the lateral load on the wheel while the short ones take the vertical load.  If spokes loosen a little (and spokes will inevitably loosen), the short spokes are pulled linearly (inline) while the long spokes tend to bend with the side strain.  In other words, looseness hurts the long spokes more, which is why they tend to break more often than the short spokes.

And, I think it’s fair to say, that the Organ Donor’s wheels suffered a bit from loose-spoke syndrome.  Ya gotta tune wire wheels at least once a year, more often if you drive them “spiritedly”.

Buchanan’s will custom make spokes if you send them a sample of both spokes and nipples for $1.64 each (nipples from $.90 and up).  I will need more long spokes than short ones, but I will have to guess a bit because I haven’t blown up but two wheels so far.


The Center Hub, Bub

The center hubs are in decent nick.  One of them, the abused one, looks like someone took a hammer to the surface where knockoff meets hub.  Why do people fix cars with hammers?  It also looks like someone pried against the center hub for some reason; maybe to hold the wheel while tightening the knockoff, but that would bend, let’s-go-with, the “crap,” out the spokes.  I can’t figure it out, but I’ll fill the gouges with the wire welder and file/sand everything smooth.  The other center hub is nearly pristine.  It was also on the spare, but it had several broken spokes so it hasn’t spent its entire life in the trunk.

A couple of the spoke holes (on the abused hub) are elongated, more evidence of loose spoke syndrome.  I don’t think the elongated holes will affect truing the wheel, as I can tighten to the elongation.  If not, I’ll can weld the elongation and file or re-drill the holes.  The elongated holes will allow grease from the splines to seep down the spokes, so I will need to RTV or silicone seal the spoke ends inside the center hub.  (I was going to do that anyway because grease will doubtlessly seep down the spokes even if the spoke ends perfectly fit their holes.)


The Rim

Bead-blasted and ready for primer.
The rims are in good shape, overall.  Both have some rust pitting, some of which is shallow enough to hide with a good high-build etching primer.  Before I exploded each wheel, I put them on my cracking Harbor Freight motorcycle wheel-balancing stand that I have pressed into service as a truing jig, and both ran relatively true - enough for me to see that I will be able to true them with judicious spoke tightening.  (Note in the picture that I have used some bearing driver adapters to center the rim on the truing jig –pretty nifty, if I may say.)
Why do people use crow bars (and hammers, apparently) to take tires off rims?! If your mechanic’s go-to tool is a hammer, get yourself a new mechanic, just sayin. Ironically, it will take some hammer and dolly work to clean up the rim edges. Fortunately, all the shillelagh shenanigans left the surfaces where the tires seat unaffected.


Close up - bead-blasting gets it clean!















The Plan

With spokes straightened or replaced, threads chased on both spokes and nipples, and every piece etching primed, I will lace up each wheel and true them wheel before painting everything a nice Argent Silver with a glossy Diamond Clear (all from The Eastwood Company).  I will tune each spoke to a satisfying “ping” when lightly rapped with the spoke wrench.  The music of happy spokes.

With new shiny chrome knockoffs, Alphie’s wheels will look spanking!


Why Not New Wheels?

Yeah, it would only be a few more dollars – and certainly a helluva lot easier – to buy a new set of wire wheels, but what’s the fun in that?!  

No one is impressed when you say, “Look at the wire wheels I bought!”  Now are they?



The Spokes Are In!

Buchanan's came through with some awesome replacement spokes and nipples.  The look great and only an experienced eye can tell the new from the old.  (I know the difference, but I'm not telling!)


Next up - Lacing Alphie's Shoes!

Sunday, July 21, 2019

A Rust Eating Brew

Wheels unearthed after twenty five (or more) years 

Page Five: A Battery Charger and Rusty Wheels

Before the Brew
Cleaning wire wheels sucks!  It takes forEVER and it hurts!  My 1962 Corvair Spyder convertible sported some spiffy Kelsey Hayes wire wheels.  They were classy.  They were gorgeous.  They were chromed.  They were also three kinds of hell to clean, what with all the fiddly nooks and crannies!
Alphie’s wheels, presently, are shabby, sad and rusty, with bent and missing spokes and a bit of curb rash, and are generally, in bad nick, BUT they are NOT chromed!  Which means I can use Electrolysis to clean them!
(See my Rust Removal with Electrolysis how-to sheet on the right side bar for more details of what you need and how to make your own rust eating brew.)
Before the Brew Two



But First:  We’ll take on each wheel one at a time, but first we must get as much of the dirt and mud off as possible.  We’ll hit it with some Simple Green, a pressure washer and some elbow grease.  The splines have decades of grease pasted on which will need to come off.  Grease is good because it prevents the wheel from rusting to the hub, but it also keeps the electrolysis from working on any area it touches.



My Rust-Eating Witch’s Brew:

For the uninitiated, electrolysis is a method of removing rust without affecting the underlying metal.  Electrolysis remove rust chemically, rather than abrasively, so that the underlying metal – or what remains of it after rust has eaten away at it – is left intact.  Electrolysis wiggles its way into every little niggly-pain-in-the-ass, hidden-from-tool-and-toil area of a wire wheel, making it an AWESOME way to clean them!  No scraping or sanding! No hurting my little fingers!

Our cauldron must be non-conductive and large enough to drown a wheel.  We’ll throw in some Arm & Hammer Washing Soda (better than Baking Soda, more on that in a minute), 15 gallons of water, a couple of pieces of rebar (or some other sacrificial ferrous metal), a battery charger and an eerie incantation, “Double, double, toil and trouble; fire burn and cauldron bubble..”

The Solution:  In our cauldron, a plastic tote, we throw a tablespoon of washing soda for each gallon of water and give it a goodly stir.  “The charm’s wound up!” (Another gratuitous Macbeth reference, forgive me.)  Water isn’t as electrically conductive as you may think, so it needs some help - that’s what the soda does.

Geeky Science Moment:  Washing Soda is sodium carbonate.  Baking soda is sodium bicarbonate.  Both will work in our witch’s brew, but sodium carbonate is slightly more alkaline than sodium bicarbonate so it munches rust with more appetite.  And since both are readily available at the grocery store, washing soda it is.  A little caution:  Sodium carbonate is alkaline enough to cause eye and skin damage so googles and gloves kids!

With electricity trickling through the solution, both sodas produce small amounts hydrogen gas at the positive lead.  Hydrogen gas is explosively flammable in high enough concentrations, so we’re doing this outside with TONS of ventilation.  (Remember the Hindenburg?  It was filled with hydrogen gas because the US wasn’t so keen on selling helium to Adolph Hitler in 1937.  BOOM, “Oh the Humanity!”  Yeah, there will be none of that!)

The Cauldron and the Brew
The Setup:  We copper-wire together several pieces of rebar and toss them in the brew.  We suspend the rusty wheel in the solution so that it neither touches the sides of the cauldron nor the pieces of rebar.  We connect (AND DO NOT GET THIS BACKWARDS) the POSITIVE lead to the pieces of rebar (now called the ANODES) and the NEGATIVE lead to the wusty-wire-wheel (now called the CATHODE).  (Check out the diagram in my How-To sheet on the right side bar.)

ZAP It!:  We set the battery charger to 12 volts, plug it in and let it bubble away for as long as it takes to eat up all the rust.  We’ll check it after 24 hours, but it may require tossing the old brew and mixing up a fresh batch and more bubbling.  When we’re done, the rust will transfer from the wheel to the pieces of rebar - MAGIC!

Bright and Shiny Wire Wheels for Alphie

After 24 hour of Boiling in the Brew
Once out of the brew, the wheel (should) be rust-free but not sos in shiny; in fact, it will be gooey with dead rust.  More pressure washing, more scrubbing, maybe even some bead blasting, not to mention some spoke tightening, maybe some spoke replacing – one of the wheels is missing four spokes – and some wheel truing before it’s ready for powder coating.

Powder Coating:  Dur, Obvs, we’re going to powder coat the wheels!  Eastwood sells some powder that matches the gray Sunbeam painted the wheels.  (Actually, Sunbeam didn’t paint them at all.  They sourced their wire wheels from Motor Wheel Service (MWS) who supplied wheels to other British manufacturers.  So Alphie’s shoes are generic British trainers, sorta.)  With all the work that goes into restoring wire wheels, we shall not abide rust where spoke meets rim, at rim edges or where rocks nick paint.  OK, so rocks can nick powder coating too, but the rocks will have to put in more effort.
After 36 hours in the Cauldron

We’ll also use the electrolysis cauldron to remove rust from just about anything big or particularly rusty like the drive shaft, brake parts, brackets and assorted bits.


After 36 hours of Rust Munchin'!
Close Up:  After 60 hours in the brew and a few seconds with a wire brush!
BTW, it's still in the soup.  I'll add some more pictures after 48 hou
rs.  It may take a long time; there's a lot of rust to munch!
Sixty Hour Update:





I left it in the brew for 60 hours and when the bubbles slowed down to nearly nothing, I pulled it out and took a look.  I laid into the back of the rim with my grinder with a wire brush on it for only a few seconds, and as you can see, we hit clean metal!  

Another shot of the 60 hour rust munch





Not perfectly clean, but the rust is easily brushed off
ONE DOWN, FOUR MORE TO GO!

Update on the Update:  I threw the wheel back in the soup for another 48 hours.  Some of the spokes were still rusted to the threads in the nipples.

Oh and, I decided to completely dissassemble the wheels so that I can repair all the scratches and gouges on the hub and rims.  I'll have to finds some new spokes and nipples, but I will be able to get the wheel completely true.

Wednesday, June 19, 2019

The Organ Donor


At peace in shady slumber
Page Four – The Organ Donor

Alphie meets Dr. Frankenstein:

The Alpine Project takes a new tack.
Defiling a grave

In my original Alpine plan (that had yet to meet reality), I, like a knight-errant sworn to his chivalric code, would gallantly perform shade-tree miracles to bring Alphie back to the glamour and romance circa 1965, wearing all her original sheet metal and accoutrements.  A glorious, noble and difficult task worthy of a dedicated champion, a True Restoration!  Yeah, so much for that.

From our first meeting, I could tell that Alphie had had some unskillful “work” done to her front end, but I had no idea how deep the wounds went until I carved inches and pounds of Bondo from her snoz.  Ignominy, anxiety, hand wringing and head scratching befell as the burden of my moral pledge began to weigh on me.

In February while we closing the Alphie deal, Clint offhandedly mentioned, “I have another Alpine at my sister’s house in Kentucky,” offering it as a freebie in the deal.  I didn’t seriously consider dragging home two rusty cadavers, but each chunk of Bondo chiseled from her flanks added another month or year to the build, not to mention mucho buckage to the budget.  So…

I emailed Clint saying, “about that Alpine in Kentucky,” more because of the rumpled snoz than her dangling rust.  He sent me some pictures, and I immediately kicked chivalry to curb, abandoned my moral quest and launched Operation Alpine Rescue to wrest the Organ Donor (the nickname she earned the day of her resurrection) from her premature grave.  All because the metalwork required to fix Alphie’s mashed nose rattled my mighty resolve.  Weakness and shame!  Moral conviction cowers to convenience and laziness as soon as reality landed its first blow! 

Alphie must suffer the same fate as Frankenstein’s monster, an amalgamated abomination, at least in the eyes of the purists!  

Operation Alpine Rescue becomes Operation Grave Robbery

Rudely yanked from her hole
Organ donors are usually - they tell me – dead.  Apparently, it hurts less that way.  Not to speak ill of the dead and I understand that the Donor is Clint’s high school car, but she has spent the last 20+ years squatting in a pasture under a tree, so her prognosis was doubtful from the get-go.  Since her tires exhaled, she has been lying with her belly against the ground, which, for rust prone cars like Sunbeam Alpines, is no bueno. 

She looked peaceful, quietly disintegrating in the shade of her tree.  But callously we invaded her repose.  We sawed down her protective saplings.  We drug farming equipment from her path.  We dug and tugged.  We huffed and puffed and finally, with the aid of a substantial 4X4 pickup, yanked the Donor out of her hole like a bad tooth.  It was a rude reintroduction to the world, and I felt a little embarrassed as if we had heedlessly thrown open the door of an occupied outhouse.

Disinterred!
On soft slanted ground, the Donor precariously teetered on two floor jacks where I swapped her wheels and flat tires for the set I looted from Alphie.  I pounded unyielding spinners, rocked gummed up splines from hubs, removed the right front brake caliper and banged the left rear brake drum with a small sledgehammer, ultimately getting three of the four wheels to roll.  The left rear wheel still stubbornly refuses to turn, but the Donor moved.

The Donor even with new shoes resists getting on the trailer
We lined up the trailer, and, with the help of a come along and my curiously rigged, jumper cable powered ATV winch in the bed of the truck, we wrestled the reluctant Donor onto the UHaul trailer rented especially for the job.  All that took more than three sweaty hours in the 90+-degree sun.  Thanks to Clint, his son Rubin and my brother-in-law Mark.  I did some of the work too – no judging!

All that rust is the frame of the car - the blue is the seat dangling where there is nothing.
Again, my first plan for The Donor was to restore her instead of Alphie because I liked her color combo better - Then I crawled under her to secure her derriere to the trailer.  Perhaps you have heard of Rusticles?  The Titanic has them – you know, rust that hangs down like icicles?

Once under the car, any thought of restoring the Donor evaporated like hope on a golf course.  I could see the broken main X shaped cross member hanging in rusty splendor from the crumbling remains of the floorboards.  In the old car hobby, that’s terminal, a fatality, a dead stop, the incontrovertible harbinger of death, even beyond the reaches of rat-rod zombiedom.  I solemnly pronounced her death and rejiggered my plans, again.

Or the (Latest) Modern Prometheus:

Alphie is a 1965 Alpine Series IV-A while the Organ Donor is a 1964 Alpine Series IV – essentially, the same model.  Both have 1592 cc four poppers and four speed trannies.  Alphie left the plant wearing a fully synchronized gearbox while the Donor’ sported a non-synchronized gear grinder.  Everything else, model wise, is the same.  In the dark of night using lightning and galvanization, Alphie will rise again as a cobbled together 1964 Alpine Series IV A.  She will be year older but will keep the benefits of her youth.

I will resurrect her as a Midnight Blue beauty of a 1964 Sunbeam Alpine Series IV with all the goodies of a 1965 series IV-A – The Best of Both!

Mixing DNA and a New Direction

The Drivetrain:  
From the two car-casses J, I will
v   - Excise the Donor’s entire front clip including the bonnet and inner wing wells
v   - Harvest the Donor’s engine block so the block number will match the body tag
v   - Amputate the Donor’s non-synchromesh tranny
v   - Transplant Alphie’s fully synchromesh tranny and
v   - Graft on the Donor’s overdrive unit and driveshaft - yeah, the Donor has overdrive, how cool is that! 
v   - Oh almost forgot, Swap the body tags– boom, number matching car!

The Color Palette:  Alphie is a stealth black car – Embassy black paint, black seats, black rubber floor mats, black dash, black door panels, black tires, just black, black, black-on-black! 
The Organ Donor is Midnight Blue with an Azure (sky) Blue seats and door panels with dark blue piping on the seats.  It has tattered scraps of red carpeting in it now, but the Azure Blue original will go back in it.  Me like those colors much gooder!

Shoes:  The Donor has 13-inch wire wheels, the shoes all Sunbeam Alpines trotted out of the factory wearing.  Someone upped Alphie’s shoes to size 14-inch, probably stolen from some other unsuspecting LBC (Little British Car, remember?) an MG, Triumph, Austin, Rover - who knows…

Other Stuff:  Whatever components are in better condition from either cadaver will one day return to the road!

Postmortem

The Organ Donor sits glumly under a tree in my front yard.  I have cleaned the leaf litter, twigs, rotted carpet and vinyl as well as pulled the seats out and removed a lot of old “stuff” from the trunk and interior.  Alas, the Donor must die so that Alphie may live.
Oh, and I collected many chiggers along the way! Yay!

Next post:  The Dissection

Show more pics!


The Grave Robbers and the Corpse

On the way to Frankenstein's Lab

Winched off the trailer back in Huntsville
A new spot under a new tree

Art picture:  Chic Patina!